The Skytec SPL-1000 PA power amplifier offers two channels of efficient power handling and a wide frequency range when paired with suitable passive PA speakers. With the multiple inputs and features that this audio power amplifier has to offer, it is a great choice for your PA needs.
Included on this PA system amplifier is a 3-band equaliser that allows you to adjust and customise the sound output to fit your liking. Cut out or boost low, mid and high frequencies so that the audio suits the room it is being used in, as well as the style of music you are playing.
There are three RCA line inputs located on the rear of this PA power amplifier that allows multiple devices to be connected at the same time. To change between each of the inputs, there is a selector switch on the front of the amplifier. This is particularly useful if you have, for example, a mixing desk and a laptop both connected to the amplifier and you need to quickly change between them without the hassle of swapping the cables over.
When audio is being played through the amplifier, it can sometimes reach volume levels that are dangerously high. To help you recognise this, the SPL-2000 has peak clip indicators that turn red when the volume is getting too high. When these light up, turn the volume down until they turn off, and this will protect the amplifier against overheating and will prolong its overall life.
The SPL-2000 is a rack-mountable amplifier, which means that it can be securely mounted in a flight case or racking system. Installing the amplifier in a flight case will protect it against damage when in transit, and mounting it in a rack system is great to keep it in one place if it's being used in a venue where it won't need to be moved.
- 1000W 2-channel PA power amplifier offering efficient power handling and sound quality
- 3-band graphic equaliser to cut or boost low, mid and high frequencies to fit your preferences
- Several RCA line inputs with an input selector switch to seamlessly change between equipment
- Peak clip LED indicator to protect the amplifier from overheating and unnecessary damage
- Rack-mountable design for mounting in a flight case or rack system
- 2-Year extended warranty
- 2 x 500W Output Power
- 3-band EQ
- Blue LED front illumination
- Input selector switch
- Peak and clip indicator LED
- Large frequency response
- Rack Mountable (19 Inch)
- 1000 Watts Total Max Power Output
- Inputs: 3.5mm Mini Jack (front) 3 x Stereo RCA/Phono (rear)
- Outputs: 2 x Screw Terminal Speaker Cable Outputs
- Front Panel Moulded Handles
- Output Power: 8 Ohms: 2 x 350W
- Output Power: 4 Ohms: 2 x 500W
- Frequency response: 20Hz-20kHz
- THD: Under 0.5%
- Distortion: Over 98dB
- Crosstalk: Over 82dB
- Impedance: 4-8 Ohm
- Input sensitivity: 0dB
- Input impedance: Over 10k Ohm
- Power supply: 230Vac, 50Hz
- Dimensions: 482 x 270 x 88mm (2U)
- Weight: 7 kg