Systemline WM15 Parallel Two Way Speaker Switch
(
BBA5034 )
Key Features
- Speaker switch for use with Systemline E50 and E100 speaker kits.
- Exact size to replace an existing light switch
- Select specific zones of the ceiling speakers you want to use, or have all speakers working as one
- Buy 2 for £105.73 each and save 3%
Need help? or want to place an order
Telephone 0203 326 0900
The Systemline WM15 two-way parallel speaker switch allows you to connect and switch two pairs of speakers in parallel from one amplifier. Parallel switching ensures best quality, but be careful as two pairs of speakers at 8 Ohms will lower the impedance to 4 Ohms. Check that your amplifier can handle this, before using.
The power handling of the WM15 is 150W RMS, and it is suitable for use with the QED WM14 volume control.
The WM15 has silver plated switch contacts to minimise audio loss. Designed to suit speaker cable and working at amplified level, i.e to be positioned after the amplifier, the WM15 has screw terminal connections for easily connecting speaker cable. It can handle cable up to 2.5 sq mm cross sectional area
- Allows easy wall-mount switching between two speakers from an single amplifier. A, B or A + B switch positions
- Connections: easy screw speaker terminals (hidden). Due to the screw terminal connections, this control may not be suitable for use with thicker speaker cables (i.e. more than 2.5mm diameter)
- Compatibility: 150W (RMS) power rating
- Parallel switching ensures the best sound quality, but care needs to be taken as the load presented to the amplifier will fall to 4 Ohms (using 8 Ohms speakers for both pairs)
- Finish: white
- 44mm deep (or more) back boxes should be used for this product
- This module should never be used in the same back box as a mains powered device or switch
- MPN: SY2035