PD Connex CX108 DMX Terminator 5-Pin Plug

( JJA5136 )

For any 5 pin DMX connector based lighting system to run correctly it is essential to close off the end off the signal run. Use of a DMX terminator plug on the last fixture in the chain will absorb the signal and prevent signal bounce back.

5 pin DMX connection is often found in higher cost theatre lighting and stage show lighting effects systems, and use of a DMX terminator plug is required to avoid the unwanted odd behaviour that often occurs in fixtures toward the end of a DMX cable run.

These 5 pin DMX connector signal terminator plugs from PD are high-quality metal shell XLR fitment with the standard 120-Ohm resistor required for proper DMX signal closure.

Key Details

• DMX signal end plug used to correctly terminate DMX signal runs
• Prevents DMX bounce back which causes erratic behaviour in lighting fixtures
• 120 Ohm resistor standard for DMX512 signal closure
• High-quality metal body 5-pin XLR chassis plug
• Essential for avoiding DMX programming errors
• 2 year warranty