2x BBA1578 - Max 2x10 inch Dual Woofer Passive Home Audio Speaker 1000 Watts
The MAX210 from DJ industry pioneers, Max, offers superb clarity of bass, medium and high frequencies for all types of music. A passive speaker featuring powerful dual 10 inch woofers for fantastic low frequencies, bullet tweeter and midrange horn covering those mids and highs, to produce amazing sound reproduction and high-output.
The MAX210 carries the same high quality build as it's fellow speakers in the range; sturdy enough for mobile DJs to transport with no concern of daily damage in transit. A protective grille secures it's woofer, not only making this speaker look great, but also preventing any dents or splits to the main driver.3-Way Full Range Configuration
The 3-way full range bass-reflex takes care of all your frequency response requirements; powerful dual 10 inch woofers for those low bass rumbles with pure clarity produced from the midrange horn and bullet tweeter are more than suitable for all genres of music. With an SPL rating greater than 97dB, matching this speaker to an amplifier is a breeze and is well suited to most good quality models, why not browse our store for matching or give us a call for support?Typical Speaker Application
The MAX210 is well suited to DJ, PA, Mobile or fixed installations, karaoke and more. The SP-15 is a passive speaker that requires an external amplifier connected, in order to produce output.
- Full range 10" Dual Woofers, Bullet Tweeter and Midrange Horn
- Large Woofer Magnets
- 2x Jack and 1x Clip Terminal
- Hollow Handles, Side Embedded
- Acoustic Carpet Covering
- Single Speaker Supplied
- Power Max: 1000W
- Impedance: 8 Ohm
- Frequency Response: 40Hz - 18kHz
- SPL@ 1W/1m: 97
- Woofer: 2x 10"
- Tweeter: Bullet
- Horn: Midrange
- Connector: 2x Jack / Clip terminal
- Dimensions: 265 x 345 x 750mm
- Weight: 9.65kg
1x DDA0192 - Skytec SPL-1000 2 Channel Power Amplifier
The Skytec SPL 1000 is a power amplifier, that features vivid blue LED lighting to suit it's modern design, with a 3-band equalizer for fine frequency tweaking and LED peak / clip indicators helping prevent any signal that is too hot.
Mounting into a standard 19 inch 2 unit rack enclosure for tight integration into any mobile DJ or typical PA installation, the SPL 1000 sits nicely, performs well and looks the part.
Auxiliary inputs are made up of three stereo pairs of RCA phono ports for the connection of laptop, mixer, DVD players and many other audio devices, with banana jack or bare-wire speaker outputs.
- 2x 500W Output Power
- 3-band EQ
- Blue LED front illumination
- Input selector switch
- Peak & clip indicator LED
- Large frequency response
- Rack Mountable (19 Inch)
- 1000 Watts Total Max Power Output
- Inputs: 3.5mm Mini Jack (front) 3x Stereo RCA/Phono (rear)
- Outputs: 2x Screw Terminal Speaker Cable Outputs
- Front Panel Moulded Handles
- Output power:8 Ohms: 2x 350W
- Output power:4 Ohms: 2x 500W
- Frequency response: 20Hz-20kHz
- THD: <0.5%
- Distortion: >98dB
- Crosstalk: >82dB
- Impedance: 4-8 Ohm
- Input sensitivity: 0dB
- Input impedance: >10kOhm
- Power supply: 230Vac, 50Hz
- Dimensions: 482 x 270 x 88mm (2U)
- Weight: 7 kg
2x JJA1179 - QTX Sound Jack Plug to Bare Wire Speaker Cable
This QTX Sound speaker cable is a heavy duty, highly flexible 6.35mm mono jack to bare wire speaker lead which is suitable for connecting together most amplifiers and speakers in DJ / music installations or any other professional audio application. The high quality 6m screened cable prevents signal interference and is covered in a durable.
- Colour: Black
- Connectors 6.35mm Mono jack plug / 6.35mm Bare Wire Cable
- Length: 6 metres (Approx. 20 feet)
- Cable Used: 2 x 0.75mm