Amate HD800 Slave Amplifiers - 800W Installation Amp
(
SSE2940 )
Key Features
- Class H slave amplifier with Amate High Dynamic Power technology
- High power design with forced fan cooling
- Selectable Stereo/Bridge mode or Parallel setting with 2 Ohm stable operation
- Built-in DC protection with thermal shutdown, short circuit output detection and AC breaker system
- Front facia LED channel gain indication with clipping limiter warning
Need help? or want to place an order
Telephone 0203 326 0900
The Amate HD800 PA slave amplifier is a high-performance installation amplifier designed for professional users.
The Amate HD series of slave amplifiers is based on their High Dynamic Power technology, which means higher efficiency in the ratio of power output versus energy consumed, making these an extremely effective installation amplifier or slave amp unit.
The HD800 PA slave amplifiers incorporate the Amate soft-start circuit with gradual volume increase, signal clip limiters, and system protection features such as temperature control, overcurrent, DC output and anti-short circuit on the outputs.
Professional installation amplifier options are included on the HD800, with 2 Ohm stable operation, Speakon locking output connections, and selectable stereo mode, bridge mode, or parallel operation for total flexibility, making the HD800 an ideal installation amplifier and large PA system slave amp.
Providing 400W RMS per channel at 4 Ohms in its stereo setting,the HD800 PA slave amps will provide high-quality audio power to your PA speakers or installation audio system, with the performance and reliability that all Amate products are known to provide.
Key Details
- Class H slave amplifier with Amate High Dynamic Power technology
- Soft Start with gradual volume increase.
- Balanced XLR inputs.
- Speakon and binding post outputs.
- Anti-clip limiter system.
- Stereo mode with Bridge mode/Parallel switch.
- 8 Ohm / 4 Ohm and 2 Ohm stable.
- Dual fan system with forced cooling.
- DC protection with thermal shutdown, short circuit output detection and AC breaker system
- High dynamic Class H amplifiers.
- Linear power supply.
- High reliability, best for installation.
- 2 U 19" rack.Soft Start.
- Balanced XLR inputs.
- Speakon and binding post outputs.
- Clip-Limiter.
- Bridge mode/Parallel switch.
- 2 Ohm stable. Forced cooling. Protections:
- DC, Short Circuit, Temperature, Breaker.
- Voltage Gain 32 dB/li>
- Input Sensitivity 1 V
- Input Impedance 20 kO
- Output Power (1 kHz 0,1 percent THD) (1)
- Stereo 8 Ohm 230 + 230 W
- Stereo 4 Ohm 400 + 400 W
- Stereo 2 Ohm 550 + 550 W (2)
- Bridge 8 Ohm 800 W
- Bridge 4 Ohm 1100 W (2)
- Average Current draw (3) 3 A 230 V AC
- Frequency Response 20 Hz - 20 kHz (0/-1 dB)
- Damping Factor (1 kHz 8 O) 280
- Crosstalk 60 dB
- S/N Ratio (A-weighted) 102 dB (A)
- Mains 220 - 240 V AC- 50/60 Hz
- Dimensions (HxWxD) 88 x 482 x 420 mm
- Weight 14 kg