2 x SIGMA-50 Telescopic Truss Lift + AM3502 Truss Support Adapters

( XXA6453 )

Truss lift tower setup with two SIGMA-50 telescopic lifting towers and two truss support clamps. Each of the truss lifts in this setup are extremely simple to use and have an easy-to-construct design, making for quick set-up times and ease of transport between locations.

Each of the SIGMA-50 truss lifting towers in this setup have four extending legs that can be folded against the main frame for ease of transport and storage. On the end of each leg is an adjustable spindle and plate with rubber feet, making each tower easy to mount on any surface with no wobbling occurring.

These lifting towers have a maximum height of 5 metres and safety bolts on all heights, allowing you to lock them in place once they have reached the required height. The locking design of the extending towers, as well as the various height possibilities, makes them easily adaptable to a variety of locations and events with varying requirements.

The thick 4mm steel rope on these truss lifts areincredibly strong, allowing considerable weights to be mounted while being easily adjustable using the rotating winch handles to achieve a variety of heights. Each lifting tower has an epoxy coating that protects it from corrosion and allows it to be used in an outdoor location for extended periods of time without rusting.

Two fixed truss supports with male poles are included with these lifting towers, inserting securely into the hole on each tower. Once installed, the U-shaped clamps on each support can hold truss segments in place, with a safety locking pin keeping the truss from moving while in operation after being raised.

Package Includes

• 2x Block & Block SIGMA-50 Telescopic Lifting Towers
• 2x Block & Block AM3502 Fixed Truss Supports

Key Details

• Truss tower lift package that securely raises truss to varied heights, ideal for raising lighting setups
• Extending legs with adjustable spindles and plates to keepeach tower sturdy on uneven surfaces
• 5m maximum height with locks on each height level to keep the towers securely in place during events
• 4mm steel ropes and rotating winch handles for simple elevation of connected truss segments
• Fixed truss supports with U-shaped clamps and safety pins to hold truss securely in place
• 2-Year extended warranty