2 x OMEGA-50 Front Load Truss Lifts + ATG5 Support Adapters

( XXA6474 )

Two OMEGA-50 truss lift towers with four U-shaped clamps, ideal for raising truss of various sizes in indoor or outdoor environments during festivals, music performances and conventions. This lifting tower setup is extremely versatile for different requirements and locations, providing a weight loading capacity of up to 200kg per tower while being easy to deconstruct for transport and storage.

Height-extensions are separated into five sections on each truss lift, with a maximum height of 6.25m available for raising truss to a desired level. The winch system extends in numerous stages with separate locking pins that may be withdrawn to allow height modifications and then mechanically locked back into place to avoid sliding, all driven by a geared crank handle.

Four extending boom legs and secure locking bolts at the foot of each lifting tower provide high-quality ground support without the risk of tipping over. A built-in water level gauge guarantees that the system is inthe right vertical position and that the balance is consistent throughout.

The epoxy coating on the weatherproof carbon steel construction reduces the risk of corrosion, increasing the lifetime of outdoor use. The OMEGA-50 lifting towers are extremely easy to move into the correct position as well as transport between locations thanks to their non-slip rubber base wheels. In addition, each tower has a folding design that makes transporting them easier and more space-efficient.

Four U-shaped clamps are included with these truss lifts that secure tightly to the forks on each tower using the rotating thumbscrews. The main outer tubes of any truss segments can be placed inside the U-shaped brackets, with safety pins then locking the truss in place to avoid sliding.

Package Includes

• 2x Block & Block OMEGA-50 Front Load Lifting Towers
• 4x Block & Block ATG5 Truss Mount Adapters

Key Details

• Truss tower lift setup with afront loading design, suitable for small or large events in indoor or outdoor environments
• 6mm steel ropes with winch handles and automatic holding brakes for ease of raising and lowering the towers
• Extending legs with adjustable spindles and plates to adjust each leg’s height to any surface perfectly
• Epoxy-coated frames to avoid rusting and non-slip rubber feet for extended use in outdoor locations
• U-shaped clamps with safety pins to securely raise truss without the risk of it sliding off the towers
• 2-Year extended warranty