12V Powered 2x Horn Speaker Annoucment System with Microphone
(
SSF2658 )
Key Features
- Horn speaker setup for vehicles
- 12V connection to connect directly to your car battery
- The horn speakers are IPX6 weatherproof certified
- Line-in, Bluetooth and USB/SD MP3 player inputs
- Included handheld microphone for real-time speech
Need help? or want to place an order
Telephone 0203 326 0900PA horn speaker system including a battery powered amplifier for speakers, two horn speakers, a handheld microphone and the cables to connect it all together. This PA horn speaker system is ideal for delivering announcements and playing music externally while on the road when mounted on a vehicle such as a van, car, or trailer.
The amplifier in this system is a battery powered amplifier for speakers like the CH300 horn speakers that come with it. The 12V power connector on the rear of this amplifier may be connected to the battery in your car, van, or other mobile vehicle for quick setup and convenience. For more permanent usage, it also contains a standard mains power connection with an included power adapter.
The CH300 speakers in this horn speaker system are fully weatherproof IPX6 certified, allowing them to be installed on the outside of your car for safe operation without the need to remove them. Because of the horn's design, sound is dispersed far and wide, makingit ideal for announcements, rallies, or use on an ice cream truck.
The input options on this PA horn speaker system are extensive, allowing you to play audio from a variety of sources. The line input may be used with CD players, and Bluetooth allows for wireless streaming from a smart device. The USB/SD MP3 player can be used to play audio files from a USB stick or SD card, making it ideal for pre-recorded announcements and jingles.
This battery-powered speaker amplifier includes a handheld microphone and a cable, allowing you to make real-time announcements from the comfort of your car. The microphone volume may be changed independently from the main music volume, making it simple to find the perfect sound balance for your requirements.
Package Includes
- 1x Power Dynamics PDC30 Portable Battery Powered Amplifier
- 2x Power Dynamics CH300 Passive Horn Speaker
- 1x Fenton DM105 Dynamic Handheld Microphone
- 2x PD Connex Bare Wire Speaker Cable 10m
Key Details
- Horn speaker setup for vehicles, ideal for rallies, speech and audio playback during transport
- 12V connection to connect the amplifier directly to your car battery for easy on-the-move operation
- The horn speakers are IPX6 weatherproof certified to be installed safely and permanently on the exterior of your vehicle
- Line-in, Bluetooth and USB/SD MP3 player inputs to play music and audio files from a range of sources
- Included handheld microphone for real-time speech, with the amplifier having separate mic volume control
- 2-Year extended warranty
- High power horn speaker 30W
- ABS plastic housing
- Weatherproof IPX6
- Supplied per piece
- Including mounting bracket
- Mobile multifunctional amplifier
- MP3 player with USB port and MicroSD slot
- BT streaming audio
- 30W amplifier
- Power supply: 220VAC or 12Vdc
- 2x Microphone inputs with volume control
- AUX volume control
- Master volume control
- Perfect for mobile use (12V)
- Colour: Black and Red
- On/off switch
- Dynamic and unidirectional
- Cardioid characteristic
- Including XLR jack cable 3m
- Output power: RMS: 30W
- Impedance: 8 Ohm
- Frequency response : 500Hz - 5.000Hz
- SPL @ 1W/1m: 102dB
- IP rating: IPX6
- Dimensions (L x W x H): 117 x 200mm
- Weight: 1.0000
- Accessories: Mounting bracket
- Playback options: BT streaming MicroSD USB
- Output power: RMS: 30W
- Impedance: 4 Ohm 8 Ohm
- Frequency response : 30Hz - 20.000Hz
- Power supply: 12V-16V DC and 100-240VAC 50/60Hz
- THD: <1%
- Dimensions (L x W x H): 150 x 52 x 190mm
- Weight: 2.2000
- Accessories: Mounting bracket Power cable
- CSA: 0.75mm
- Conductor: 24x0.2mm
- Outer diameter: 2.5 x 5.5mm
- Weight (kg): 0.3
- Frequency response: 60Hz - 12kHz
- Sensitivity: -76dB
- Impedance: 600 Ohm
- Microphone: Connector: XLR
- Connector: Jack 6.3mm
- Lead length: 4m
- Dimensions: 185 x 48mm
- Weight: 450g