PD Connex CX Splitter

CX Splitter

- 4-way splitter converter
- Numbered connectors with a simple multicore solution
- 4 3-pin XLR connectors to single RJ45 ethercon
- 0.7m length and lightweight design for simple installation
- Robust aluminium housing

Cable Loom

Stage Snake

4-To-1 Connector

XLR RJ45

An ideal way to reduce the amount of cables running from performer to desk, the PD Connex CX192 RJ45 to 4x 3-Pin Female XLR is a simple way to consolidate up to 4 XLRs on stage into one RJ45 cable, which can then be split out again by another Cat Snake Loom at the mixing desk end. Less cable lengths running across a stage reduces clutter and makes tracing leads easier. Also available: PD Connex CX190 RJ45 to 4x 3-Pin Male XLR.

Convenient Cable Consolidator For XLRs to RJ45 For Clear Stages

PD Connex CX192 RJ45 to 4x 3-Pin Female XLR Splitter ethercon

PD Connex CX192 RJ45 to 4x 3-Pin Female XLR Splitter

PD Connex CX192 RJ45 to 4x 3-Pin Female XLR Splitter XLR end

CONVENIENT•TIDY•EASY•CAPABLE

ONE CABLE

Consolidate XLR cable runs by plugging in 4 XLR cables into the splitter and then plug a RJ45 ethernet cable into the splitter, run it to the desk where another splitter can be plugged into the desk.

3-PIN XLR

Available in 3-pin XLR female and male, the possibilities are endless when it comes to using these splitters to reduce stage cable clutter. Each member of the band can have their individual cable loom.

3-PIN XLR

FAST SETUP

The CX Splitters are a lightweight and convenient piece of equipment. No need for metres-upon-metres of XLR cables to run the full length of the stage, just smaller XLRs and one long ethernet cable.